Using everything I've learned from my powerwall experiments I've embarked on a range extender project for my 2011 Nissan Leaf.

This is a support page for my YouTube videos on the project:

  1. Powerboot project intro
  2. DC cable extension
  3. B24 plug and socket
  4. Under boot space templates
  5. 400 volt splice
  6. and more to come


B24 plug and socket

3D print (STL) files for a compatible version of the 2011 (Gen 1.1) Nissan Leaf B24 plug and socket. Note: the 2013 "Gen 1.2" Leaf batteyr uses a slightly different version of this plug. My version only works for the first generation batteries in 2011=2012 Leafs.

I've got a few more Nissan Leaf related STL files here: https://www.myminifactory.com/users/PaulKennett

Under boot space templates

These footprint templates are for a volume that is 100 mm deep.

Other formats: PDF, PNG

Other formats: PDF, PNG

Page last modified on May 15, 2019, at 10:33 pm
Powered by PmWiki